ZM-16 underground ore transport truck is mainly used in the mine underground, mainly to transport loose materials after blasting. It can also be used in railway, highway, water conservancy and other tunnel projects, especially suitable for poor working conditions, narrow, low and muddy working surfaces. The power system adopts today's advanced engine and is equipped with exhaust muffler Purifier. The transmission system adopts hydraulic torque converter and power shift gearbox, which is easy to operate and stable. The working braking system adopts wet multi-disc braking, which increases the safety factor, and is safe and reliable when working in harsh environment, high water content and muddy tunnels. Use ergonomics to make the operation interface and operation mode more convenient for underground and tunnel operation.
characteristic:
① Flexible and applicable. Self-powered, trackless, and without track laying;
② It can simplify the roadway layout and facilitate the roadway construction at one time;
③ The slewing bearing is used to connect the swing frame to swing to reduce the failure rate;
1. Main configuration of the whole machine |
|
(1) Engine |
|
model |
DEUTZ BF6M1013EC |
Rated power |
165kW |
Rated speed |
2300r/min |
manufacturer |
deutz |
(2) Hydraulic torque converter |
|
model |
C270 |
Type |
Single-stage industrial type, auxiliary drive hydraulic system |
manufacturer |
Imported from the United States |
(3) Power transmission |
|
model |
R32000 |
Type |
4 forward gears and 4 reverse gears complete power shift |
manufacturer |
Imported from the United States |
(4) Drive axle |
|
model |
3221 |
Type |
Rigid planetary axle with differential, multi-disc wet brake (spring brake, hydraulic release) |
manufacturer |
Huafeng Customization |
2. Main technical parameters of the complete machine
1
Car volume (stacking) (m3)
8
2
Rated load capacity (t)
16
3
Climbing capacity (heavy load) (%)
≥14(25%)
4
Maximum traction force (kN)
≥160
5
Corresponding unloading angle (°)
60
6
Maximum steering angle (°)
±40
7
Swing angle (°)
±8
8
Minimum ground clearance (mm)
275
9
Loading height (mm)
2180±100
10
Maximum height of machine during unloading (mm)
4200±100
11
Wheelbase (mm)
4046
12
Minimum turning radius (mm)
outside
7570±100
inside
4630±100
13
Driving speed (theoretical value) (km/h)
Gear I
5.0±0.5
Gear II
11.0±1.0
Gear III
19.0±2.0
Grade IV
25.0±2.0
14
Overall length (transportation status) (mm)
8000±100
Overall width (mm)
2180±50
Height of complete machine (height of driving shed) (mm)
2250±50
15
Carriage lifting time (s)
≤15
16
Carriage descent time (s)
≤14
17
Departure angle (°)
15
18
Operating weight (including hydraulic oil) (t)
15.8
19
Tire type
14.00-24
20
Fuel tank volume (L)
160
21
Volume of hydraulic oil tank (L)
180