WJ-4.5 Underground Internal Combustion Scraper,WJ-4.5 Underground Internal Combustion Scraper price,WJ-4.5 Underground Internal Combustion Scraper Manufacturer-Shandong China Coal Industry & Mining Group'

 Details Of WJ-4.5 Underground Internal Combustion Scraper

Introduction Of WJ-4.5 Underground Internal Combustion Scraper

WJ-4.5 underground internal combustion LHD is a central articulated frame, with diesel engine as the prime mover, hydraulic or hydraulic, mechanical transmission, tire travel, front loading and front unloading loading and unloading equipment, hydraulic transmission, articulated frame, tire travel. The brake system is a wet multi-disc fully closed brake integrating parking brake, service brake and emergency brake, with spring brake and hydraulic release. The loose materials after blasting are loaded and transported by shovels, which are especially suitable for narrow and low-cut sites with high water content and mud. They are the main equipment for trackless mining in underground mines. It can also be used in railway, highway and water tunnel construction.

Working conditions:

a) The ambient temperature of the roadway is - 5 ℃~+40 ℃, and the maximum relative humidity is not more than 90% (when the temperature is 25 ℃);

b) The altitude of the use site shall not exceed 1800m. When used in plateau environment with an altitude of more than 1800m, necessary measures or special design shall be taken according to the situation;

c) The sulfur content of fuel used for internal combustion scraper shall not be greater than 0.2%;

d) The ventilation capacity of the roadway shall meet the requirements of engine power,

e) The scraper is strictly prohibited to be used in places with flammable and explosive gases such as gas and coal dust.

Parameter Of WJ-4.5 Underground Internal Combustion Scraper

1. Main configuration of the whole machine
(1) Engine
model	OM926LA.E3A/1
Rated power	240kW
manufacturer	Daimler AG
(2) Hydraulic torque converter
model	C5400
type	Single-stage industrial type with hydraulic pump drive
manufacturer	Imported from the United States
(3) Power transmission
model	R36000
type	4 forward gears and 4 reverse gears complete power shift
manufacturer	Imported from the United States
(4) Drive axle
model	19D
type	Fully enclosed multi-disc wet spring brake
manufacturer	Imported from the United States

2. Main technical parameters of the complete machine
1	Stacking bucket capacity (m3)		4.5
2	Rated load capacity (t)		9
3	Climbing capacity (heavy load) (%)		≥25
4	Maximum traction force (kN)		≥200
5	Maximum shoveling force (kn)		≥180
6	Corresponding unloading angle (°)		42
7	Maximum steering angle (°)		±40
8	Swing angle (°)		±10
9	Minimum ground clearance (mm)		340
10	Maximum lifting height (mm)		5000±200
11	Maximum unloading height (mm)		≥1900
12	Minimum unloading distance (mm)		≥1100
13	Wheelbase (mm)		3360
14	Minimum turning radius (mm)	Bucket outside	6610±200
		Inside of rear wheel	3390±200
15	Driving speed (km/h) (theoretical value)	Gear I	5.0±0.5
		Gear II	10.0±1.0
		Gear III	16.5±1.0
16	Overall length (transportation status) (mm)		9200±100
	Overall width (mm)		2250±50
	Height of complete machine (height of driving shed) (mm)		2200±50
17	Action time of working device (s)		<20
18	Departure angle (°)		15
19	Operating weight (including hydraulic oil) (t)		24000±500
20	Tire type		18.00-25
21	Fuel tank volume (L)		320
22	Volume of hydraulic oil tank (L)		460