WJ-3 Underground Internal Combustion Scraper,WJ-3 Underground Internal Combustion Scraper price,WJ-3 Underground Internal Combustion Scraper Manufacturer-Shandong China Coal Industry & Mining Group'

 Details Of WJ-3 Underground Internal Combustion Scraper

Introduction Of WJ-3 Underground Internal Combustion Scraper

WJ-3 underground internal combustion LHD is mainly used in underground mines, mainly for shoveling and transporting loose materials after blasting, and can also be used in railway, highway, water conservancy and other tunnel projects. It is especially suitable for working face with poor working conditions, narrow, low and muddy working site. With diesel engine as the prime mover, hydraulic transmission, articulated frame and tire travel are adopted. The brake system is a wet multi-disc fully closed brake integrating parking brake, service brake and emergency brake, with spring brake and hydraulic release.

The characteristics of WJ-3 underground internal combustion scraper are as follows:

① DCECBF6M1013EC type turbocharged system is adopted to improve fuel utilization;

② The original imported platinum purifier from Canada greatly reduces air pollution;

③ Front and rear axle 4-wheel drive, strong power, strong climbing ability;

Parameter Of WJ-3 Underground Internal Combustion Scraper

1. Main configuration of the whole machine
(1) Engine
Model	BF6M1013EC
Rated power	165kW
manufacturer	DEUTZ, Germany
(2) Hydraulic torque converter
Model	C270
Type	Single-stage industrial type with hydraulic pump drive
manufacturer	Imported from the United States
(3) Power transmission
Model	R32000
Type	Complete power shift with 3 forward gears and 3 reverse gears
manufacturer	Imported from the United States
(4) Drive axle
Model	16D
Type	Fully enclosed multi-disc wet spring brake
manufacturer	Imported from the United States

2. Main technical parameters of the complete machine
1	Stacking bucket capacity (m3)		3
2	Rated load capacity (t)		6
3	Climbing capacity (heavy load) (%)		≥25
4	Maximum traction force (kN)		≥120
5	Maximum shoveling force (kN)		≥100
6	Corresponding unloading angle (°)		40
7	Maximum steering angle (°)		±38
8	Swing angle (°)		±8
9	Minimum ground clearance (mm)		340
10	Maximum lifting height (mm)		4830
11	Maximum unloading height (mm)		1880
12	Minimum unloading distance (mm)		1250
13	Wheelbase (mm)		2900
14	Minimum turning radius (mm)	Bucket outside	≤6610
		Inside of rear wheel	≤3680
15	Driving speed (km/h) (theoretical value)	Gear I	0-5.5
		Gear II	0-11.0
		Gear III	0-15.0
16	Overall length (transportation status) (mm)		9030±100
	Overall width (mm)		2170±50
	Height of complete machine (height of driving shed) (mm)		2240±50
17	Action time of working device (s)		＜25
18	Departure angle (°)		15
19	Operating weight (including hydraulic oil) (t)		20000±500
20	Tire type		17.50-25
21	Fuel tank volume (L)		260
22	Volume of hydraulic oil tank (L)		300