5T Rack Type Track Jack Instruction

Rack type track jack is mainly used for railway track laying and maintenance, such as bridge erection work is widely used for lifting and supporting the installation of various weights, and equipment. It is suitable for railway rails and auxiliary, and bridge is installed, and vehicles, equipment, weight lifting.
Rack type track jack working principle is one type of manual lifting tools, compact structure, reasonable use of the rocker swing jaw moves up and down with the fixed jaw joint cooperation, promoting the rack up or down, lifting objects along lift.
Product name: QD5-15 series rack jack (also known as track jack) is also called the manual lifting machine.

5TRack Type Track Jack Instruction

1.Lifting - track jack should be smoothly completed, with a length of 1.5 meters of steel steel rod inserted into the handle hole and up and down reciprocating throw to ascend a height it is needed.
2.Slow down, turn slowly drop control handle up to braking position will lever up and down throw, every reciprocating or one tooth at a time.
3.Drops - pull lever, using leverage vertical impact downhill baseboard end surface, can again down to the starting position.
4. The sliding parts often lubrication, finding the parts damaged change in time.

5TRack Type Track Jack Parameters

Model  QD5

Max jacking 5T

Max hook capacity 2.5T

Lifting height    160mm

Jack up height        345mm

Feet hook height      43mm

5TRack Type Track Jack Photo

Because of the production batch, the specific model are different, the above pictures are only for reference , you can contact our sales staff for further details on the specific verification.