Introduction Of 3ZBQ-10/10 Pneumatic Injection Pump

3ZBQ-10/10 pneumatic grouting pump is mainly used for construction of grouted reinforcement, water blocking and filling of broken rock formations; exclude underground hidden dangers in flood fighting and rescue. The highlight advantages of this series injection pump : high pressure, high efficiency, light weight, easy to move; wide range of application, both single-component slurry and two-component chemical slurry can be injected; also can act as emulsion pump or high-pressure water pump, hydraulic pump and so on. Particularly suitable for construction engineering of coal mines, non-coal mines, water conservancy, subway, construction, bridge construction and some place of flammable, explosive, temperature and humidity changes in large.

Model And Meaning Of 3ZBQ-10/10 Pneumatic Injection Pump

Model: 3ZBQ-10/10 pneumatic injection pump;

3ZB - Type Code: Coal mine plunger pump;

Q - Feature Code: Power source type: Pneumatic

10/10 - the main parameters: drainage flow under the 0.5Mpa(L / min) / Drain pressure (Mpa).

Parameter Of 3ZBQ-10/10 Pneumatic Injection Pump

Air Source Pressure MPa: 0.3-0.63;

Reciprocation Times / min: ≥ 40

Air Consumption m3 / min: ≤2.0

Ventilation Pipe Diameter in.:3/4, or 25 K type quick connector

Siphon Diameter in.:3/4

Drain Diameter mm.:13

Mixing Ratio: 1: 4

Rated Pressure (air pressure 0.5MPa) MPa: 10

Rated Flow (Dump pressure 10MPa) L / min: 10

Pictures Of ZBQ-10/10  Pneumatic Injection Pump