The MJ50 Mining Chain Coal Cutting Machine can be used in mines where methane, coal dust, hydrogen sulfide, carbon dioxide, etc., do not exceed the safety levels specified in the coal mine safety regulations. It can be used for the cutting of the coal mining face of the gently inclined ultra-thin composite coal seam with a height of 0.45 meters or more in the general small and medium-sized coal mines. It can also be used for the guttering of gypsum mines and salt mines.
The motor part of MJ50 Coal cutter machien has explosion-proof function
Motor cooling method is Wei water cooling, good dustproof effect
This machine greatly improves coal mining efficiency, saves mining time and improves efficiency for enterprises.
Adustment method |
Hand artery movement |
Working method |
Working back and forth along the coal wall |
Traction method |
Wire rope traction |
Motor Model |
YBCS-50 A |
Traction speed |
0~1.3m/min |
Motor Power |
50KW |
Groove depth |
1.1-1.2m |
Rated voltage |
380V/660V |
Cut line speed |
2.8-2.96m/s |
Dimention |
(L*W*H) |
No-load lowering speed |
7.6-8m/min |
(2780±13)x(600±3)x(390±2) |
|
Cutting groove height |
0.11-0.12m |
Total weight |
2200±10kg |
Dustproof |
Cooling water cutting section dustproof |
|
|