Introduction of KCT Series Portable Paint Coating Thickness Gauge

1. KCT Series Portable Paint Coating Thickness Gauge Measurement Range :

KCT100 Measurement Range： 0—6000um

KCT100A Measurement Range： 0—6000um

KCT200 Measurement Range： 0—1250um or 0—50mil

2. Accuracy：± [(1%~3%)H+1um] Note：H is thickness reading

3. powers down after 60 seconds of no activity.

Operation Guide of KCT Series Portable Paint Coating Thickness Gauge

1. Power-on and Warm-up

Keystroke once;Wait until READY！ is displayed on the LCD. Now the gauge is ready for measurements.

2. Zeroing

Keystroke twice; when BASE ZERO is displayed, place flat on Fe or Al base; hold steady. After measurement is obtained, DONE is shown and gauge beeps. Then lift gauge.

Note: Please conduct zeroing process after changing base. Zeroing process could be repeated for better results.

3. Unit Change

Keystroke three times; convert from ums to mils or vice versa.

4. Reset

Keystroke four times，Wait until RESET is displayed; after gauge resets, users can conduct zeroing process if necessary.

Materials

Gauge Reference Fe and Al Base

Certified Plastic Shim Battery etc.

Parameters of KCT Series Portable Paint Coating Thickness Gauge

Images of KCT Series Portable Paint Coating Thickness Gauge